Blink lite v1 code#
Blink lite v1 plus#

Plug the machine in and turn it back on.

Plug the machine in and turn it back on.

Turn off the machine, and unplug the power cord from the power supply.

Plug the machine in and turn it back on.Īn error requiring you to contact the service center has occurred.

If the error isn't resolved, service is required. Replace the empty ink cartridge with the one containing ink.

Plug the machine in and turn it back on.

Turn off the machine, and unplug the power cord from the power supply.

Plug the machine in and turn it back on.

Turn off the machine, and unplug the power cord from the power supply.

Remove foreign material, if any, from the feeding area. The machine may not print properly if you touch it.

Clear the jammed paper or protective material preventing the ink cartridge holder from moving, then turn the machine back on.īe careful not to touch the components inside the machine.

Cancel printing and turn off the machine.

(Theses errors are generally unrecoverable and indicate that the printer may require service.) Lights flash alternately green then orange Note that the resulting print quality may not be satisfactory if printing is continued under the ink out condition.

Replace the empty ink cartridge immediately after the printing.

Printing can continue under the ink out condition.The function for detecting the remaining ink level will be disabled.

If printing is in progress and you want to continue printing, press the Stop button for at least 5 seconds with the ink cartridge installed.

Replace the ink cartridge and close the cover.

Printing can't be performed because the ink cartridge isn't properly installed or isn't compatible with the machine.

Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.

To continue printing without this function, press the machine's Stop button for at least 5 seconds.

The function for detecting the remaining ink level will be disabled since the ink level can't be correctly detected.

Make sure that genuine Canon FINE cartridges are properly installed.

If you use CREATIVE PARK PREMIUM, confirm the message on the computer screen.

Envelope: Set the paper size to Envelope Com 10 ( Windows)/ Envelope #10 ( Mac) or Envelope DL ( Windows/ Mac).

Glossy Photo Paper: Set the paper size to 4'圆' 10x15cm ( Windows)/ 4 x 6 ( Mac).

Blink lite v1 plus#

Photo Paper Plus Glossy II: Set the paper size to 4'圆' 10x15cm ( Windows)/ 4 x 6 ( Mac ® ), or 5'x7' 13x18cm ( Windows)/ 5 x 7 ( Mac).

If the protective material or the tape is still attached, remove it.

The protective material for the ink cartridge or the tape remains attached.Ĭheck the inside of the machine. Press the Black or Color button to continue printing. If you want to cancel printing, press the Stop button.Printing can't be executed because the ink cartridge isn't compatible with the machine. If necessary, remove the cartridges and reinstall them.Īppropriate FINE cartridge isn't installed.Īppropriate ink cartridge isn't installed.Confirm that the cartridge properly seated and close the cover.Open the cover and push the cartridge completely up.Is the FINE cartridge is properly installed? Remove the jammed paper and reload the paper correctly.Press the Black or Color button to restart the print job.Light flashes repeatedly orange Number of flashes If the error isn't resolved, service is required. If you can't find the appropriate error in the table below, refer to the Online Manual. In addition, the lamp(s) flash.Īlternately green then orange - see Table 2 below.

Blink lite v1 code#

When a printer error occurs, a support code (error number) and a message display on the computer screen.